HANDRAIL PLACEMENT | WINKO Client View

Project & parameters

Project information

Project name Client Tank size

Drawing no.

Revision

Date

Drawn by

Checked by

Approved by

Drawing

Drawing title

Used as the title for the combined drawing export.

Client view title

Shown in the client view project title box.

Snap & Editing

Snap movable geometry

Snap target Custom increment (mm)

Project

Drawing preset

Saves dimensions, edited members, ladders, roof manholes and all top sumps.

Tank

Tank length (mm)

Tank width / side (mm)

Tank height (mm)

Panel size (mm)

Handrail height (mm)

Front ladders

Ladder width (mm)

Ladder bottom (mm)

Rung spacing (mm)

U-bracket reach (mm)

Ladder centreline from front wall (mm)

Ladder centres (mm)

Comma-separated centre positions.

Roof manhole

Show roof manholes

X from front left (mm)

Z from front edge (mm)

Selected manhole 2 of 2 · 1 × 1 m · drag to move

Front vertical angles / pipes

Vertical angle locations

Auto: every panel gap

Automatically placed at every panel joint, including both ends.

Pipe segments (start-end mm)

Back vertical angles / pipes

Vertical angle locations

Auto: every panel gap

Automatically placed at every panel joint, including both ends.

Pipe segments (start-end mm)

Views B & D · Side vertical angles / pipes

Vertical angle locations across tank width

Auto: every panel gap

Automatically placed at every side panel joint. The 2500 mm pipe connector remains independent.

View B · Right side pipe segments (mm) View D · Left side pipe segments (mm)

Centre at 2500 mm = pipe connector only (no vertical post). Pipe connectors are also shown automatically at joined pipe segments such as 0-3000 and 3000-6000.

New Top Sump Defaults

Top sump width (mm)

Top sump length (mm)

Top sump height (mm)

Gap from first ladder (mm)

Top sump is 0.5 m high by default. The 1.0 m handrail is drawn above the sump top.

Top sump name

Show 1000 mm handrail label

PDF export

Show on A3 sheet

Click Export PDF, then choose Save as PDF in the print window. The 3D model is excluded from this sheet.

Isometric View

Handrail 20(10+10)x5x4mHANDRAIL PLACEMENT

Tank20 × 5 × 4 m

Drawing no.WNK-HR-20X5X4-001

RevisionA

Issue date29 Sept 2026

Concrete plinth Black plinth WINKO logo in exportClick pipe/post to inspect · drag rotate · scroll zoom

20 × 5 × 4 m tank1000 mm panel grid2 top sump(s)2 ladder(s)

Tank panels Guardrail / vertical angles at every panel gap External ladder

Properties & analysis

Object inspector

Select a sump, ladder, vertical angle, or rail in the drawing.

Automatic Material Schedule

Item	Qty	Detail
50×50 vertical angle — 1000 mm Full	46 pcs	46.00 m total
Top sump handrail vertical angle	4 pcs	4.00 m total
1 inch guardrail pipe — 3000 mm	20 pcs	60.00 m total
1 inch guardrail pipe — 2510 mm	2 pcs	5.02 m total
1 inch guardrail pipe — 2500 mm	8 pcs	20.00 m total
1 inch guardrail pipe — 2255 mm	4 pcs	9.02 m total
1 inch guardrail pipe — 2000 mm	2 pcs	4.00 m total
1 inch guardrail pipe — 1000 mm	2 pcs	2.00 m total
Total guardrail pipe	38 pcs	100.04 m total
Pipe connector	24 pcs	Top + middle rail joints
U-bracket	8 pcs	Ladder / guardrail connections
External ladder	2 set(s)	16 rungs/set; 22.40 m side rails
Ladder rung	32 pcs	2 ladder(s)
Roof manhole with cover	2 set(s)	MH-1: X 11496.9, Z 500 mm; MH-2: X 8454.2, Z 500 mm
Top sump — TOP SUMP 1	1 pc	1000 × 2000 × 500 mm
TOP SUMP 1 guardrail	1 set	1000 × 2000 × 1000(H) mm; 1/8 pipes
Top sump — TOP SUMP 2	1 pc	1000 × 2000 × 500 mm
TOP SUMP 2 guardrail	1 set	1000 × 2000 × 1000(H) mm; 1/8 pipes

Engineering Validation

✓ 46 panel-gap vertical angles checked

✓ Guardrail height 1000 mm

✓ TOP SUMP 1 within roof boundary

✓ TOP SUMP 2 within roof boundary

⚠ Manhole 2 overlaps TOP SUMP 1.

⚠ TOP SUMP 1 guardrail upright 3 is removed.

⚠ TOP SUMP 1 guardrail upright 4 is removed.

⚠ TOP SUMP 1 back middle guardrail pipe is removed.

⚠ TOP SUMP 1 back upper guardrail pipe is removed.

⚠ TOP SUMP 1 front middle guardrail pipe is removed.

⚠ TOP SUMP 1 left middle guardrail pipe is removed.

⚠ TOP SUMP 1 left upper guardrail pipe is removed.

⚠ TOP SUMP 1 right middle guardrail pipe is removed.

⚠ TOP SUMP 1 right upper guardrail pipe is removed.

⚠ TOP SUMP 1 guardrail is within 250 mm of a roof edge.

⚠ TOP SUMP 2 guardrail upright 3 is removed.

⚠ TOP SUMP 2 guardrail upright 4 is removed.

⚠ TOP SUMP 2 back middle guardrail pipe is removed.

⚠ TOP SUMP 2 back upper guardrail pipe is removed.

⚠ TOP SUMP 2 front middle guardrail pipe is removed.

⚠ TOP SUMP 2 left middle guardrail pipe is removed.

⚠ TOP SUMP 2 left upper guardrail pipe is removed.

⚠ TOP SUMP 2 right middle guardrail pipe is removed.

⚠ TOP SUMP 2 right upper guardrail pipe is removed.

⚠ TOP SUMP 2 guardrail is within 250 mm of a roof edge.

⚠ front vertical angle at 7000 mm panel gap is removed.

⚠ front vertical angle at 8000 mm panel gap is removed.

⚠ front vertical angle at 12000 mm panel gap is removed.

⚠ front vertical angle at 13000 mm panel gap is removed.

Revision history

No revision records yet.

Rev

Date

Description By